Sunlight-supply Grozone Control SCC1 Temperature, Humidity and CO2 Instrukcja Użytkownika Pobierz pdf (Strona 9)

9 of 12

Grozone SCC1 Advanced User Guide – March 2012 www.grozonecontrol.com

FACTORY SETTING

ALTERNATE SETTING

FAN OUTPUT

FAIL STATE

The FAN Output is turned ON when a Temperature

Sensor Failure is detected, regardless of DAY and

NIGHT Temperature Setpoints.

The FAN Output is turned OFF when a Temperature

Sensor Failure is detected, regardless of DAY and

NIGHT Temperature Setpoints.

FACTORY SETTING

ALTERNATE SETTING

AUX FAN

OUTPUT

FAIL STATE

The AUX FAN Output (optional OB1-V) follows the

regular FAN Output (ON or OFF) in the event of a

Temperature Sensor Failure, regardless of DAY and

NIGHT Temperature Setpoints.

The AUX FAN Output (optional OB1-V) sets the

OB1-V at IDLE SPEED in the event of a Temperature

Sensor Failure, regardless of DAY and NIGHT

Temperature Setpoints. IDLE SPEED value is set

directly on OB1-V module through an adjustment on

the side of the enclosure.

ACCESSING THE FACTORY / ALTERNATE SETTING EDIT MODE

Step 1- Follow the procedure to enter CO2 Sensor Calibration...

 Day Enrichment Knob to CAL

 Lock/Unlock Slide Switch to UNLOCK

 HOLD pushbutton

...BUT YOU HAVE TO ABORT the Calibration AFTER 5 SECONDS (one blink per second)

by moving the Slide Switch back to the LOCK position. Then let the pushbutton go.

Step 2 - You are now given access to the FACTORY / ALTERNATE SETTING EDIT MODE.

TO EXIT this mode, simply return the Slide Switch to UNLOCK position.

Step 3 - The 11 settings that can be changed are grouped in 3 different PARAMETERS.

One PARAMETER can include up to 6 settings. Make sure to select the right PARAMETER

from these 3 choices.

SETTING NAME

PARAMETER TO EDIT

CO2 Elevation

CO2 ELEVATION

(SEE PAGE 10)

Fan Output Control Range (also called Differential)

OUTPUT CONTROL

(SEE PAGE 11)

Humidity Output Control Range (also called Differential)

CO2 Output Control Range (also called Differential)

Aux Heater Output Control Range (also called Differential)

LOW TEMPERATURE LIMIT

HIGH TEMPERATURE LIMIT

Fan And CO2 Outputs PRIORITY MANAGEMENT

PRIORITY AND FAIL

(SEE PAGE 12)

Fan Output ON-DELAY

Fan Output FAIL STATE

AUX Fan Output FAIL STATE (optional)

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

Sunlight-supply Grozone Control SCC1 Temperature, Humidity and CO2 Instrukcja Użytkownika Strona 9

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oświetlenie Sunlight-supply Grozone Control SCC1 Temperature, Humidity and CO2